Zachodniopomorski Uniwersytet Technologiczny w Szczecinie

Administracja Centralna Uczelni - Wymiana międzynarodowa (S1)

Sylabus przedmiotu Techniques and technologies in the architecture and construction:

Informacje podstawowe

Kierunek studiów Wymiana międzynarodowa
Forma studiów studia stacjonarne Poziom pierwszego stopnia
Tytuł zawodowy absolwenta
Obszary studiów
Profil
Moduł
Przedmiot Techniques and technologies in the architecture and construction
Specjalność przedmiot wspólny
Jednostka prowadząca Katedra Mieszkalnictwa i Podstaw Techniczno-Ekologicznych Architektury
Nauczyciel odpowiedzialny Piotr Gradziński <piotr.gradzinski@zut.edu.pl>
Inni nauczyciele
ECTS (planowane) 3,0 ECTS (formy) 3,0
Forma zaliczenia zaliczenie Język angielski
Blok obieralny Grupa obieralna

Formy dydaktyczne

Forma dydaktycznaKODSemestrGodzinyECTSWagaZaliczenie
laboratoriaL1 30 3,01,00zaliczenie

Wymagania wstępne

KODWymaganie wstępne
W-1Passing up the preceding subjects (or determining the required knowledge): required classes in the semester I, II and III.

Cele przedmiotu

KODCel modułu/przedmiotu
C-1Gaining knowledge about basic design mechanisms and processes, mastering a skill of variant modeling of processes and simulation in the created architectural space.

Treści programowe z podziałem na formy zajęć

KODTreść programowaGodziny
laboratoria
T-L-11. Overview of the scope of exercises.2
T-L-22. General characteristics of the preparation of technical documentation, cadastral map and essential, land and building register, outline of geotechnical issues.2
T-L-33. Foundation of the building - characteristics and types of foundations.2
T-L-44. Types of insulation - anti-moisture, anti-water - footings or foundation slabs.2
T-L-55. Building materials, their properties and application.2
T-L-66.I - Types of internal and external walls (including one-two-three-layer walls, plasterboard walls)2
T-L-77. II - Types of internal and external walls (wall with a light cover layer - panels composite, fiber cement, wooden or plastic panels etc.).2
T-L-88. III - Types of external and external walls (wall with a heavy covering layer - slabs ceramic, stone, etc.).2
T-L-99. Ventilation, chimneys and plumbing risers.2
T-L-1010. Types and kinds of roofs, roof truss, utility flat roof, green roofs.2
T-L-1111. Details - tiled roof (finished with plasterboards from the inside), attic (finishing for a two-layer and three-layer wall), the eaves at the external wall (various types finishes).2
T-L-1212. Balconies, terraces.2
T-L-1313. Checking the drawings.2
T-L-1414. Function - Form - Construction.2
T-L-1515. Submission of drawings and models / completion of the course.2
30

Obciążenie pracą studenta - formy aktywności

KODForma aktywnościGodziny
laboratoria
A-L-1During the laboratory exercises, students develop technical drawings of architectural and construction details, as indicated by the lecturer. During the course, the lecturer presents problems related to the use of building materials, techniques and technologies, and how to solve them. Alternative solutions to the construction problem are also given, with an indication of the durability aspect of building partitions and materials, and with reference to heat and humidity issues. Active participation in classes involving the attempt to solve the problem on your own.35
A-L-2Independent work at home consisting in drawing up a drawing of an issue that is the subject of discussion during laboratory exercises and its presentation during the next classes.40
75

Metody nauczania / narzędzia dydaktyczne

KODMetoda nauczania / narzędzie dydaktyczne
M-1Technical and technological issues based on selected examples of detailed architectural and construction solutions. Features of internal and external building partitions. Detailed drawings. Exercise 1. Waterproofing of the foundation slab (classic mastic and roofing felt and alternative solutions). Exercise 2. Anti-water insulation of the elevator shaft - trim of the foundation slab (classic mastic and roofing felt and alternative solutions). Exercise 3. Counter-insulation of a reinforced concrete pile cap. Foundation on slabs. Exercise 4. Detail of a two-layer wall solution at the foundation. Vertical and horizontal waterproofing (classic and alternative solutions). Exercise 5. Detail of a three-layer wall solution (with a pressure wall) at the foundation. Vertical and horizontal waterproofing (classic and alternative solutions). Exercise 6. Detail of the parapet solution for a two- and three-layer wall. Exercise 7. Detail of a wall solution with a light cover layer. Exercise 8. Detail of a wall solution with a heavy covering layer. Exercise 9. Detail of the eaves of a roof covered with ceramic tiles. Exercise 10. Detail of a roof ridge solution covered with ceramic tiles. Exercise 11. Detail of a flat roof solution with a biologically active layer. Exercise 12. Principles of shaping a non-ventilated and ventilated roof. Exercise 13. Principles of shaping the balcony slab (continuous and discontinuous). Exercise 14. Examples of facade glazing systems and detailed solutions. Exercise 15. Principles of shaping the corner window.
M-2Classes are based on study and project work during classes, at the beginning of which a project task is formulated, which should be solved by the method of subsequent approximations. At the beginning of the semester students are given the algorithm of design for all exercises. Individual corrections, homeworks, closures and progress reviews of project work are carried out.
M-3Precise definition of the topic of each exercise, which brings the student closer to the solution of the project topic.
M-4As a result of the course, the student should be able to determine the types of technical, technological and material solutions present in construction. In particular, he should be able to determine their durability and usefulness. The basis for passing the course is to present an A4 notebook with drawing solutions and a description.

Sposoby oceny

KODSposób oceny
S-1Ocena formująca: During the laboratory exercises, students develop technical drawings of architectural and construction details, as indicated by the lecturer. During the course, the lecturer presents problems related to the use of building materials, techniques and technologies, and how to solve them. Alternative solutions to the construction problem are also given, with an indication of the durability aspect of building partitions and materials, and with reference to heat and humidity issues. Active participation in classes involving the attempt to solve the problem on your own.
S-2Ocena podsumowująca: As a result of the course, the student should be able to determine the types of technical, technological and material solutions present in construction. In particular, he should be able to determine their durability and usefulness. The basis for passing the course is to present an A4 notebook with drawing solutions and a description.

Zamierzone efekty uczenia się - wiedza

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WA_1-_WA-2021-TT_W01
Students knowns and understands the theoretical foundations of Techniques and technologies in the architecture and construction.
C-1T-L-7, T-L-8, T-L-1, T-L-2, T-L-3, T-L-9, T-L-10, T-L-11, T-L-4, T-L-6, T-L-5, T-L-12, T-L-13, T-L-14, T-L-15M-1, M-2, M-3, M-4S-1, S-2

Zamierzone efekty uczenia się - umiejętności

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WA_1-_WA-2021-TT_U01
Design and detailing of basics in the techniques and technologies in the architecture and construction.
C-1T-L-7, T-L-8, T-L-1, T-L-2, T-L-3, T-L-9, T-L-10, T-L-11, T-L-4, T-L-6, T-L-5, T-L-12, T-L-13, T-L-14, T-L-15M-1, M-2, M-3, M-4S-1, S-2

Zamierzone efekty uczenia się - inne kompetencje społeczne i personalne

Zamierzone efekty uczenia sięOdniesienie do efektów kształcenia dla kierunku studiówOdniesienie do efektów zdefiniowanych dla obszaru kształceniaCel przedmiotuTreści programoweMetody nauczaniaSposób oceny
WM-WA_1-_WA-2021-TT_K01
The student understands the need for lifelong learning.
C-1T-L-7, T-L-8, T-L-1, T-L-2, T-L-3, T-L-9, T-L-10, T-L-11, T-L-4, T-L-6, T-L-5, T-L-12, T-L-13, T-L-14, T-L-15M-1, M-2, M-3, M-4S-1, S-2

Kryterium oceny - wiedza

Efekt uczenia sięOcenaKryterium oceny
WM-WA_1-_WA-2021-TT_W01
Students knowns and understands the theoretical foundations of Techniques and technologies in the architecture and construction.
2,0
3,0Work shows that the student, after pointing out the mistakes, will be able to correct them on his own.
3,5
4,0
4,5
5,0

Kryterium oceny - umiejętności

Efekt uczenia sięOcenaKryterium oceny
WM-WA_1-_WA-2021-TT_U01
Design and detailing of basics in the techniques and technologies in the architecture and construction.
2,0
3,0Student is able to shows and discrabes samples of techniques and technologies.
3,5
4,0
4,5
5,0

Kryterium oceny - inne kompetencje społeczne i personalne

Efekt uczenia sięOcenaKryterium oceny
WM-WA_1-_WA-2021-TT_K01
The student understands the need for lifelong learning.
2,0
3,0The student understands the need for lifelong learning.
3,5
4,0
4,5
5,0

Literatura podstawowa

  1. DETAIL, Detail, Munich, DETAIL - Magazine of Architecture + Construction Details
  2. Design Theory and Methods using CAD/CAE, Elsevier, 2014

Treści programowe - laboratoria

KODTreść programowaGodziny
T-L-11. Overview of the scope of exercises.2
T-L-22. General characteristics of the preparation of technical documentation, cadastral map and essential, land and building register, outline of geotechnical issues.2
T-L-33. Foundation of the building - characteristics and types of foundations.2
T-L-44. Types of insulation - anti-moisture, anti-water - footings or foundation slabs.2
T-L-55. Building materials, their properties and application.2
T-L-66.I - Types of internal and external walls (including one-two-three-layer walls, plasterboard walls)2
T-L-77. II - Types of internal and external walls (wall with a light cover layer - panels composite, fiber cement, wooden or plastic panels etc.).2
T-L-88. III - Types of external and external walls (wall with a heavy covering layer - slabs ceramic, stone, etc.).2
T-L-99. Ventilation, chimneys and plumbing risers.2
T-L-1010. Types and kinds of roofs, roof truss, utility flat roof, green roofs.2
T-L-1111. Details - tiled roof (finished with plasterboards from the inside), attic (finishing for a two-layer and three-layer wall), the eaves at the external wall (various types finishes).2
T-L-1212. Balconies, terraces.2
T-L-1313. Checking the drawings.2
T-L-1414. Function - Form - Construction.2
T-L-1515. Submission of drawings and models / completion of the course.2
30

Formy aktywności - laboratoria

KODForma aktywnościGodziny
A-L-1During the laboratory exercises, students develop technical drawings of architectural and construction details, as indicated by the lecturer. During the course, the lecturer presents problems related to the use of building materials, techniques and technologies, and how to solve them. Alternative solutions to the construction problem are also given, with an indication of the durability aspect of building partitions and materials, and with reference to heat and humidity issues. Active participation in classes involving the attempt to solve the problem on your own.35
A-L-2Independent work at home consisting in drawing up a drawing of an issue that is the subject of discussion during laboratory exercises and its presentation during the next classes.40
75
(*) 1 punkt ECTS, odpowiada około 30 godzinom aktywności studenta
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięWM-WA_1-_WA-2021-TT_W01Students knowns and understands the theoretical foundations of Techniques and technologies in the architecture and construction.
Cel przedmiotuC-1Gaining knowledge about basic design mechanisms and processes, mastering a skill of variant modeling of processes and simulation in the created architectural space.
Treści programoweT-L-77. II - Types of internal and external walls (wall with a light cover layer - panels composite, fiber cement, wooden or plastic panels etc.).
T-L-88. III - Types of external and external walls (wall with a heavy covering layer - slabs ceramic, stone, etc.).
T-L-11. Overview of the scope of exercises.
T-L-22. General characteristics of the preparation of technical documentation, cadastral map and essential, land and building register, outline of geotechnical issues.
T-L-33. Foundation of the building - characteristics and types of foundations.
T-L-99. Ventilation, chimneys and plumbing risers.
T-L-1010. Types and kinds of roofs, roof truss, utility flat roof, green roofs.
T-L-1111. Details - tiled roof (finished with plasterboards from the inside), attic (finishing for a two-layer and three-layer wall), the eaves at the external wall (various types finishes).
T-L-44. Types of insulation - anti-moisture, anti-water - footings or foundation slabs.
T-L-66.I - Types of internal and external walls (including one-two-three-layer walls, plasterboard walls)
T-L-55. Building materials, their properties and application.
T-L-1212. Balconies, terraces.
T-L-1313. Checking the drawings.
T-L-1414. Function - Form - Construction.
T-L-1515. Submission of drawings and models / completion of the course.
Metody nauczaniaM-1Technical and technological issues based on selected examples of detailed architectural and construction solutions. Features of internal and external building partitions. Detailed drawings. Exercise 1. Waterproofing of the foundation slab (classic mastic and roofing felt and alternative solutions). Exercise 2. Anti-water insulation of the elevator shaft - trim of the foundation slab (classic mastic and roofing felt and alternative solutions). Exercise 3. Counter-insulation of a reinforced concrete pile cap. Foundation on slabs. Exercise 4. Detail of a two-layer wall solution at the foundation. Vertical and horizontal waterproofing (classic and alternative solutions). Exercise 5. Detail of a three-layer wall solution (with a pressure wall) at the foundation. Vertical and horizontal waterproofing (classic and alternative solutions). Exercise 6. Detail of the parapet solution for a two- and three-layer wall. Exercise 7. Detail of a wall solution with a light cover layer. Exercise 8. Detail of a wall solution with a heavy covering layer. Exercise 9. Detail of the eaves of a roof covered with ceramic tiles. Exercise 10. Detail of a roof ridge solution covered with ceramic tiles. Exercise 11. Detail of a flat roof solution with a biologically active layer. Exercise 12. Principles of shaping a non-ventilated and ventilated roof. Exercise 13. Principles of shaping the balcony slab (continuous and discontinuous). Exercise 14. Examples of facade glazing systems and detailed solutions. Exercise 15. Principles of shaping the corner window.
M-2Classes are based on study and project work during classes, at the beginning of which a project task is formulated, which should be solved by the method of subsequent approximations. At the beginning of the semester students are given the algorithm of design for all exercises. Individual corrections, homeworks, closures and progress reviews of project work are carried out.
M-3Precise definition of the topic of each exercise, which brings the student closer to the solution of the project topic.
M-4As a result of the course, the student should be able to determine the types of technical, technological and material solutions present in construction. In particular, he should be able to determine their durability and usefulness. The basis for passing the course is to present an A4 notebook with drawing solutions and a description.
Sposób ocenyS-1Ocena formująca: During the laboratory exercises, students develop technical drawings of architectural and construction details, as indicated by the lecturer. During the course, the lecturer presents problems related to the use of building materials, techniques and technologies, and how to solve them. Alternative solutions to the construction problem are also given, with an indication of the durability aspect of building partitions and materials, and with reference to heat and humidity issues. Active participation in classes involving the attempt to solve the problem on your own.
S-2Ocena podsumowująca: As a result of the course, the student should be able to determine the types of technical, technological and material solutions present in construction. In particular, he should be able to determine their durability and usefulness. The basis for passing the course is to present an A4 notebook with drawing solutions and a description.
Kryteria ocenyOcenaKryterium oceny
2,0
3,0Work shows that the student, after pointing out the mistakes, will be able to correct them on his own.
3,5
4,0
4,5
5,0
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięWM-WA_1-_WA-2021-TT_U01Design and detailing of basics in the techniques and technologies in the architecture and construction.
Cel przedmiotuC-1Gaining knowledge about basic design mechanisms and processes, mastering a skill of variant modeling of processes and simulation in the created architectural space.
Treści programoweT-L-77. II - Types of internal and external walls (wall with a light cover layer - panels composite, fiber cement, wooden or plastic panels etc.).
T-L-88. III - Types of external and external walls (wall with a heavy covering layer - slabs ceramic, stone, etc.).
T-L-11. Overview of the scope of exercises.
T-L-22. General characteristics of the preparation of technical documentation, cadastral map and essential, land and building register, outline of geotechnical issues.
T-L-33. Foundation of the building - characteristics and types of foundations.
T-L-99. Ventilation, chimneys and plumbing risers.
T-L-1010. Types and kinds of roofs, roof truss, utility flat roof, green roofs.
T-L-1111. Details - tiled roof (finished with plasterboards from the inside), attic (finishing for a two-layer and three-layer wall), the eaves at the external wall (various types finishes).
T-L-44. Types of insulation - anti-moisture, anti-water - footings or foundation slabs.
T-L-66.I - Types of internal and external walls (including one-two-three-layer walls, plasterboard walls)
T-L-55. Building materials, their properties and application.
T-L-1212. Balconies, terraces.
T-L-1313. Checking the drawings.
T-L-1414. Function - Form - Construction.
T-L-1515. Submission of drawings and models / completion of the course.
Metody nauczaniaM-1Technical and technological issues based on selected examples of detailed architectural and construction solutions. Features of internal and external building partitions. Detailed drawings. Exercise 1. Waterproofing of the foundation slab (classic mastic and roofing felt and alternative solutions). Exercise 2. Anti-water insulation of the elevator shaft - trim of the foundation slab (classic mastic and roofing felt and alternative solutions). Exercise 3. Counter-insulation of a reinforced concrete pile cap. Foundation on slabs. Exercise 4. Detail of a two-layer wall solution at the foundation. Vertical and horizontal waterproofing (classic and alternative solutions). Exercise 5. Detail of a three-layer wall solution (with a pressure wall) at the foundation. Vertical and horizontal waterproofing (classic and alternative solutions). Exercise 6. Detail of the parapet solution for a two- and three-layer wall. Exercise 7. Detail of a wall solution with a light cover layer. Exercise 8. Detail of a wall solution with a heavy covering layer. Exercise 9. Detail of the eaves of a roof covered with ceramic tiles. Exercise 10. Detail of a roof ridge solution covered with ceramic tiles. Exercise 11. Detail of a flat roof solution with a biologically active layer. Exercise 12. Principles of shaping a non-ventilated and ventilated roof. Exercise 13. Principles of shaping the balcony slab (continuous and discontinuous). Exercise 14. Examples of facade glazing systems and detailed solutions. Exercise 15. Principles of shaping the corner window.
M-2Classes are based on study and project work during classes, at the beginning of which a project task is formulated, which should be solved by the method of subsequent approximations. At the beginning of the semester students are given the algorithm of design for all exercises. Individual corrections, homeworks, closures and progress reviews of project work are carried out.
M-3Precise definition of the topic of each exercise, which brings the student closer to the solution of the project topic.
M-4As a result of the course, the student should be able to determine the types of technical, technological and material solutions present in construction. In particular, he should be able to determine their durability and usefulness. The basis for passing the course is to present an A4 notebook with drawing solutions and a description.
Sposób ocenyS-1Ocena formująca: During the laboratory exercises, students develop technical drawings of architectural and construction details, as indicated by the lecturer. During the course, the lecturer presents problems related to the use of building materials, techniques and technologies, and how to solve them. Alternative solutions to the construction problem are also given, with an indication of the durability aspect of building partitions and materials, and with reference to heat and humidity issues. Active participation in classes involving the attempt to solve the problem on your own.
S-2Ocena podsumowująca: As a result of the course, the student should be able to determine the types of technical, technological and material solutions present in construction. In particular, he should be able to determine their durability and usefulness. The basis for passing the course is to present an A4 notebook with drawing solutions and a description.
Kryteria ocenyOcenaKryterium oceny
2,0
3,0Student is able to shows and discrabes samples of techniques and technologies.
3,5
4,0
4,5
5,0
PoleKODZnaczenie kodu
Zamierzone efekty uczenia sięWM-WA_1-_WA-2021-TT_K01The student understands the need for lifelong learning.
Cel przedmiotuC-1Gaining knowledge about basic design mechanisms and processes, mastering a skill of variant modeling of processes and simulation in the created architectural space.
Treści programoweT-L-77. II - Types of internal and external walls (wall with a light cover layer - panels composite, fiber cement, wooden or plastic panels etc.).
T-L-88. III - Types of external and external walls (wall with a heavy covering layer - slabs ceramic, stone, etc.).
T-L-11. Overview of the scope of exercises.
T-L-22. General characteristics of the preparation of technical documentation, cadastral map and essential, land and building register, outline of geotechnical issues.
T-L-33. Foundation of the building - characteristics and types of foundations.
T-L-99. Ventilation, chimneys and plumbing risers.
T-L-1010. Types and kinds of roofs, roof truss, utility flat roof, green roofs.
T-L-1111. Details - tiled roof (finished with plasterboards from the inside), attic (finishing for a two-layer and three-layer wall), the eaves at the external wall (various types finishes).
T-L-44. Types of insulation - anti-moisture, anti-water - footings or foundation slabs.
T-L-66.I - Types of internal and external walls (including one-two-three-layer walls, plasterboard walls)
T-L-55. Building materials, their properties and application.
T-L-1212. Balconies, terraces.
T-L-1313. Checking the drawings.
T-L-1414. Function - Form - Construction.
T-L-1515. Submission of drawings and models / completion of the course.
Metody nauczaniaM-1Technical and technological issues based on selected examples of detailed architectural and construction solutions. Features of internal and external building partitions. Detailed drawings. Exercise 1. Waterproofing of the foundation slab (classic mastic and roofing felt and alternative solutions). Exercise 2. Anti-water insulation of the elevator shaft - trim of the foundation slab (classic mastic and roofing felt and alternative solutions). Exercise 3. Counter-insulation of a reinforced concrete pile cap. Foundation on slabs. Exercise 4. Detail of a two-layer wall solution at the foundation. Vertical and horizontal waterproofing (classic and alternative solutions). Exercise 5. Detail of a three-layer wall solution (with a pressure wall) at the foundation. Vertical and horizontal waterproofing (classic and alternative solutions). Exercise 6. Detail of the parapet solution for a two- and three-layer wall. Exercise 7. Detail of a wall solution with a light cover layer. Exercise 8. Detail of a wall solution with a heavy covering layer. Exercise 9. Detail of the eaves of a roof covered with ceramic tiles. Exercise 10. Detail of a roof ridge solution covered with ceramic tiles. Exercise 11. Detail of a flat roof solution with a biologically active layer. Exercise 12. Principles of shaping a non-ventilated and ventilated roof. Exercise 13. Principles of shaping the balcony slab (continuous and discontinuous). Exercise 14. Examples of facade glazing systems and detailed solutions. Exercise 15. Principles of shaping the corner window.
M-2Classes are based on study and project work during classes, at the beginning of which a project task is formulated, which should be solved by the method of subsequent approximations. At the beginning of the semester students are given the algorithm of design for all exercises. Individual corrections, homeworks, closures and progress reviews of project work are carried out.
M-3Precise definition of the topic of each exercise, which brings the student closer to the solution of the project topic.
M-4As a result of the course, the student should be able to determine the types of technical, technological and material solutions present in construction. In particular, he should be able to determine their durability and usefulness. The basis for passing the course is to present an A4 notebook with drawing solutions and a description.
Sposób ocenyS-1Ocena formująca: During the laboratory exercises, students develop technical drawings of architectural and construction details, as indicated by the lecturer. During the course, the lecturer presents problems related to the use of building materials, techniques and technologies, and how to solve them. Alternative solutions to the construction problem are also given, with an indication of the durability aspect of building partitions and materials, and with reference to heat and humidity issues. Active participation in classes involving the attempt to solve the problem on your own.
S-2Ocena podsumowująca: As a result of the course, the student should be able to determine the types of technical, technological and material solutions present in construction. In particular, he should be able to determine their durability and usefulness. The basis for passing the course is to present an A4 notebook with drawing solutions and a description.
Kryteria ocenyOcenaKryterium oceny
2,0
3,0The student understands the need for lifelong learning.
3,5
4,0
4,5
5,0